Guides.rubyonrails.org

Chapters

1. Introduction
2. Constants Refresher
   • Nesting
   • Class and Module Definitions are Constant Assignments
   • Constants are Stored in Modules
   • Resolution Algorithms
3. Vocabulary
   • Parent Namespaces
   • Loading Mechanism
4. Autoloading Availability
5. autoload_paths
6. Autoloading Algorithms
   • Relative References
   • Qualified References
   • Automatic Modules
   • Generic Procedure
7. require_dependency
8. Constant Reloading
9. Module#autoload isn't Involved
10. Common Gotchas
    • Nesting and Qualified Constants
    • Autoloading and STI
    • Autoloading and require
    • Autoloading and Initializers
    • require_dependency and Initializers
    • When Constants aren't Missed
    • Autoloading within Singleton Classes
    • Autoloading in BasicObject

1 Introduction

Ruby on Rails allows applications to be written as if their code was preloaded.

In a normal Ruby program a class needs to load its dependencies:

require 'application_controller'
require 'post'

class PostsController < ApplicationController
  def index
    @posts = Post.all
  end
end

Our Rubyist instinct quickly sees some redundancy in there: If classes were defined in files matching their name, couldn't their loading be automated somehow? We could save scanning the file for dependencies, which is brittle.

Moreover, Kernel#require loads files once, but development is much more smooth if code gets refreshed when it changes without restarting the server. It would be nice to be able to use Kernel#load in development, and Kernel#require in production.

Indeed, those features are provided by Ruby on Rails, where we just write

class PostsController < ApplicationController
  def index
    @posts = Post.all
  end
end

This guide documents how that works.

2 Constants Refresher

While constants are trivial in most programming languages, they are a rich topic in Ruby.

It is beyond the scope of this guide to document Ruby constants, but we are nevertheless going to highlight a few key topics. Truly grasping the following sections is instrumental to understanding constant autoloading and reloading.

2.1 Nesting

Class and module definitions can be nested to create namespaces:

module XML
  class SAXParser
    # (1)
  end
end

The nesting at any given place is the collection of enclosing nested class and module objects outwards. For example, in the previous example, the nesting at (1) is

[XML::SAXParser, XML]

It is important to understand that the nesting is composed of class and module objects, it has nothing to do with the constants used to access them, and is also unrelated to their names.

For instance, while this definition is similar to the previous one:

class XML::SAXParser
  # (2)
end

the nesting in (2) is different, XML does not belong to it:

[XML::SAXParser]

We can see in this example that the name of a class or module that belongs to a certain nesting does not necessarily correlate with the namespaces at the spot.

Even more, they are totally independent, take for instance

module X::Y
  module A::B
    # (3)
  end
end

The nesting in (3) consists of two module objects:

[A::B, X::Y]

So, it not only doesn't end in A, which does not even belong to the nesting, but it also contains X::Y, which is independent from A::B.

The nesting is an internal stack maintained by the interpreter, and it gets modified according to these rules:

• The class object following a class keyword gets pushed when its body is executed, and popped after it.

• The module object following a module keyword gets pushed when its body is executed, and popped after it.

• A singleton class opened with class << object gets pushed, and popped later.

• When any of the *_eval family of methods is called using a string argument, the singleton class of the receiver is pushed to the nesting of the eval'ed code.

• The nesting at the top-level of code interpreted by Kernel#load is empty unless the load call receives a true value as second argument, in which case a newly created anonymous module is pushed by Ruby.

It is interesting to observe that blocks do not modify the stack. In particular the blocks that may be passed to Class.new and Module.new do not get the class or module being defined pushed to their nesting. That's one of the differences between defining classes and modules in one way or another.

The nesting at any given place can be inspected with Module.nesting.

2.2 Class and Module Definitions are Constant Assignments

Let's suppose the following snippet creates a class (rather than reopening it):

class C
end

Ruby creates a constant C in Object and stores in that constant a class object. The name of the class instance is "C", a string, named after the constant.

That is,

class Project < ActiveRecord::Base
end

performs a constant assignment equivalent to

Project = Class.new(ActiveRecord::Base)

Similarly, module creation using the module keyword as in

module Admin
end

performs a constant assignment equivalent to

Admin = Module.new

Thus, when one informally says "the String class", that really means: the class object the interpreter creates and stores in a constant called "String" in the class object stored in the Object constant. String is otherwise an ordinary Ruby constant and everything related to constants applies to it, resolution algorithms, etc.

Likewise, in the controller

class PostsController < ApplicationController
  def index
    @posts = Post.all
  end
end

Post is not syntax for a class. Rather, Post is a regular Ruby constant. If all is good, the constant evaluates to an object that responds to all.

That is why we talk about constant autoloading, Rails has the ability to load constants on the fly.

2.3 Constants are Stored in Modules

Constants belong to modules in a very literal sense. Classes and modules have a constant table; think of it as a hash table.

Let's analyze an example to really understand what that means. While in a casual setting some abuses of language are customary, the exposition is going to be exact here for didactic purposes.

Let's consider the following module definition:

module Colors
  RED = '0xff0000'
end

First, when the module keyword is processed the interpreter creates a new entry in the constant table of the class object stored in the Object constant. Said entry associates the name "Colors" to a newly created module object. Furthermore, the interpreter sets the name of the new module object to be the string "Colors".

Later, when the body of the module definition is interpreted, a new entry is created in the constant table of the module object stored in the Colors constant. That entry maps the name "RED" to the string "0xff0000".

In particular, Colors::RED is totally unrelated to any other RED constant that may live in any other class or module object. If there were any, they would have separate entries in their respective constant tables.

Put special attention in the previous paragraphs to the distinction between class and module objects, constant names, and value objects associated to them in constant tables.

2.4 Resolution Algorithms

2.4.1 Resolution Algorithm for Relative Constants

At any given place in the code, let's define cref to be the first element of the nesting if it is not empty, or Object otherwise.

Without getting too much into the details, the resolution algorithm for relative constant references goes like this:

1. If the nesting is not empty the constant is looked up in its elements and in order. The ancestors of those elements are ignored.

2. If not found, then the algorithm walks up the ancestor chain of the cref.

3. If not found, const_missing is invoked on the cref. The default implementation of const_missing raises NameError, but it can be overridden.

Rails autoloading does not emulate this algorithm, but its starting point is the name of the constant to be autoloaded, and the cref. See more in Relative References.

2.4.2 Resolution Algorithm for Qualified Constants

Qualified constants look like this:

Billing::Invoice

Billing::Invoice is composed of two constants: Billing is relative and is resolved using the algorithm of the previous section; Invoice is qualified by Billing and we are going to see its resolution next. Let's call parent to that qualifying class or module object, that is, Billing in the example above. The algorithm for qualified constants goes like this:

1. The constant is looked up in the parent and its ancestors.

2. If the lookup fails, const_missing is invoked in the parent. The default implementation of const_missing raises NameError, but it can be overridden.

As you see, this algorithm is simpler than the one for relative constants. In particular, the nesting plays no role here, and modules are not special-cased, if neither they nor their ancestors have the constants, Object is not checked.

Rails autoloading does not emulate this algorithm, but its starting point is the name of the constant to be autoloaded, and the parent. See more in Qualified References.

3 Vocabulary

3.1 Parent Namespaces

Given a string with a constant path we define its parent namespace to be the string that results from removing its rightmost segment.

For example, the parent namespace of the string "A::B::C" is the string "A::B", the parent namespace of "A::B" is "A", and the parent namespace of "A" is "".

The interpretation of a parent namespace when thinking about classes and modules is tricky though. Let's consider a module M named "A::B":

• The parent namespace, "A", may not reflect nesting at a given spot.

• The constant A may no longer exist, some code could have removed it from Object.

• If A exists, the class or module that was originally in A may not be there anymore. For example, if after a constant removal there was another constant assignment there would generally be a different object in there.

• In such case, it could even happen that the reassigned A held a new class or module called also "A"!

• In the previous scenarios M would no longer be reachable through A::B but the module object itself could still be alive somewhere and its name would still be "A::B".

The idea of a parent namespace is at the core of the autoloading algorithms and helps explain and understand their motivation intuitively, but as you see that metaphor leaks easily. Given an edge case to reason about, take always into account that by "parent namespace" the guide means exactly that specific string derivation.

3.2 Loading Mechanism

Rails autoloads files with Kernel#load when config.cache_classes is false, the default in development mode, and with Kernel#require otherwise, the default in production mode.

Kernel#load allows Rails to execute files more than once if constant reloading is enabled.

This guide uses the word "load" freely to mean a given file is interpreted, but the actual mechanism can be Kernel#load or Kernel#require depending on that flag.

4 Autoloading Availability

Rails is always able to autoload provided its environment is in place. For example the runner command autoloads:

$ bin/rails runner 'p User.column_names'
["id", "email", "created_at", "updated_at"]

The console autoloads, the test suite autoloads, and of course the application autoloads.

By default, Rails eager loads the application files when it boots in production mode, so most of the autoloading going on in development does not happen. But autoloading may still be triggered during eager loading.

For example, given

class BeachHouse < House
end

if House is still unknown when app/models/beach_house.rb is being eager loaded, Rails autoloads it.

5 autoload_paths

As you probably know, when require gets a relative file name:

require 'erb'

Ruby looks for the file in the directories listed in $LOAD_PATH. That is, Ruby iterates over all its directories and for each one of them checks whether they have a file called "erb.rb", or "erb.so", or "erb.o", or "erb.dll". If it finds any of them, the interpreter loads it and ends the search. Otherwise, it tries again in the next directory of the list. If the list gets exhausted, LoadError is raised.

We are going to cover how constant autoloading works in more detail later, but the idea is that when a constant like Post is hit and missing, if there's a post.rb file for example in app/models Rails is going to find it, evaluate it, and have Post defined as a side-effect.

Alright, Rails has a collection of directories similar to $LOAD_PATH in which to lookup that post.rb. That collection is called autoload_paths and by default it contains:

• All subdirectories of app in the application and engines. For example, app/controllers. They do not need to be the default ones, any custom directories like app/workers belong automatically to autoload_paths.

• Any existing second level directories called app/*/concerns in the application and engines.

• The directory test/mailers/previews.

Also, this collection is configurable via config.autoload_paths. For example, lib was in the list years ago, but no longer is. An application can opt-in throwing this to config/application.rb:

config.autoload_paths += "#{Rails.root}/lib"

The value of autoload_paths can be inspected. In a just generated application it is (edited):

$ bin/rails r 'puts ActiveSupport::Dependencies.autoload_paths'
.../app/assets
.../app/controllers
.../app/helpers
.../app/mailers
.../app/models
.../app/controllers/concerns
.../app/models/concerns
.../test/mailers/previews

6 Autoloading Algorithms

6.1 Relative References

A relative constant reference may appear in several places, for example, in

class PostsController < ApplicationController
  def index
    @posts = Post.all
  end
end

all three constant references are relative.

6.1.1 Constants after the class and module Keywords

Ruby performs a lookup for the constant that follows a class or module keyword because it needs to know if the class or module is going to be created or reopened.

If the constant is not defined at that point it is not considered to be a missing constant, autoloading is not triggered.

So, in the previous example, if PostsController is not defined when the file is interpreted Rails autoloading is not going to be triggered, Ruby will just define the controller.

6.1.2 Top-Level Constants

On the contrary, if ApplicationController is unknown, the constant is considered missing and an autoload is going to be attempted by Rails.

In order to load ApplicationController, Rails iterates over autoload_paths. First checks if app/assets/application_controller.rb exists. If it does not, which is normally the case, it continues and finds app/controllers/application_controller.rb.

If the file defines the constant ApplicationController all is fine, otherwise LoadError is raised:

unable to autoload constant ApplicationController, expected
<full path to application_controller.rb> to define it (LoadError)

6.1.3 Namespaces

Autoloading ApplicationController looks directly under the directories of autoload_paths because the nesting in that spot is empty. The situation of Post is different, the nesting in that line is [PostsController] and support for namespaces comes into play.

The basic idea is that given

module Admin
  class BaseController < ApplicationController
    @@all_roles = Role.all
  end
end

to autoload Role we are going to check if it is defined in the current or parent namespaces, one at a time. So, conceptually we want to try to autoload any of

Admin::BaseController::Role
Admin::Role
Role

in that order. That's the idea. To do so, Rails looks in autoload_paths respectively for file names like these:

admin/base_controller/role.rb
admin/role.rb
role.rb

modulus some additional directory lookups we are going to cover soon.

Let's see how Rails autoloads the Post constant in the PostsController above assuming the application has a Post model defined in app/models/post.rb.

First it checks for posts_controller/post.rb in autoload_paths:

app/assets/posts_controller/post.rb
app/controllers/posts_controller/post.rb
app/helpers/posts_controller/post.rb
...
test/mailers/previews/posts_controller/post.rb

Since the lookup is exhausted without success, a similar search for a directory is performed, we are going to see why in the next section:

app/assets/posts_controller/post
app/controllers/posts_controller/post
app/helpers/posts_controller/post
...
test/mailers/previews/posts_controller/post

If all those attempts fail, then Rails starts the lookup again in the parent namespace. In this case only the top-level remains:

app/assets/post.rb
app/controllers/post.rb
app/helpers/post.rb
app/mailers/post.rb
app/models/post.rb

A matching file is found in app/models/post.rb. The lookup stops there and the file is loaded. If the file actually defines Post all is fine, otherwise LoadError is raised.

6.2 Qualified References

When a qualified constant is missing Rails does not look for it in the parent namespaces. But there's a caveat: unfortunately, when a constant is missing Rails is not able to say if the trigger was a relative or qualified reference.

For example, consider

module Admin
  User
end

and

Admin::User

If User is missing, in either case all Rails knows is that a constant called "User" was missing in a module called "Admin".

If there is a top-level User Ruby would resolve it in the former example, but wouldn't in the latter. In general, Rails does not emulate the Ruby constant resolution algorithms, but in this case it tries using the following heuristic:

If none of the parent namespaces of the class or module has the missing constant then Rails assumes the reference is relative. Otherwise qualified.

For example, if this code triggers autoloading

Admin::User

and the User constant is already present in Object, it is not possible that the situation is

module Admin
  User
end

because otherwise Ruby would have resolved User and no autoloading would have been triggered in the first place. Thus, Rails assumes a qualified reference and considers the file admin/user.rb and directory admin/user to be the only valid options.

In practice this works quite well as long as the nesting matches all parent namespaces respectively and the constants that make the rule apply are known at that time.

But since autoloading happens on demand, if the top-level User by chance was not yet loaded then Rails has no way to know whether Admin::User should load it or raise NameError.

These kind of name conflicts are rare in practice but, in case there's one, require_dependency provides a solution by making sure the constant needed to trigger the heuristic is defined in the conflicting place.

6.3 Automatic Modules

When a module acts as a namespace, Rails does not require the application to defines a file for it, a directory matching the namespace is enough.

Suppose an application has a backoffice whose controllers are stored in app/controllers/admin. If the Admin module is not yet loaded when Admin::UsersController is hit, Rails needs first to autoload the constant Admin.

If autoload_paths has a file called admin.rb Rails is going to load that one, but if there's no such file and a directory called admin is found, Rails creates an empty module and assigns it to the Admin constant on the fly.

6.4 Generic Procedure

Relative references are reported to be missing in the cref where they were hit, and qualified references are reported to be missing in their parent. (See Resolution Algorithm for Relative Constants at the beginning of this guide for the definition of cref, and Resolution Algorithm for Qualified Constants for the definition of parent.)

The procedure to autoload constant C in an arbitrary situation is as follows:

if the class or module in which C is missing is Object
  let ns = ''
else
  let M = the class or module in which C is missing

  if M is anonymous
    let ns = ''
  else
    let ns = M.name
  end
end

loop do
  # Look for a regular file.
  for dir in autoload_paths
    if the file "#{dir}/#{ns.underscore}/c.rb" exists
      load/require "#{dir}/#{ns.underscore}/c.rb"

      if C is now defined
        return
      else
        raise LoadError
      end
    end
  end

  # Look for an automatic module.
  for dir in autoload_paths
    if the directory "#{dir}/#{ns.underscore}/c" exists
      if ns is an empty string
        let C = Module.new in Object and return
      else
        let C = Module.new in ns.constantize and return
      end
    end
  end

  if ns is empty
    # We reached the top-level without finding the constant.
    raise NameError
  else
    if C exists in any of the parent namespaces
      # Qualified constants heuristic.
      raise NameError
    else
      # Try again in the parent namespace.
      let ns = the parent namespace of ns and retry
    end
  end
end

7 require_dependency

Constant autoloading is triggered on demand and therefore code that uses a certain constant may have it already defined or may trigger an autoload. That depends on the execution path and it may vary between runs.

There are times, however, in which you want to make sure a certain constant is known when the execution reaches some code. require_dependency provides a way to load a file using the current loading mechanism, and keeping track of constants defined in that file as if they were autoloaded to have them reloaded as needed.

require_dependency is rarely needed, but see a couple of use-cases in Autoloading and STI and When Constants aren't Triggered.

8 Constant Reloading

When config.cache_classes is false Rails is able to reload autoloaded constants.

For example, in you're in a console session and edit some file behind the scenes, the code can be reloaded with the reload! command:

> reload!

When the application runs, code is reloaded when something relevant to this logic changes. In order to do that, Rails monitors a number of things:

• config/routes.rb.

• Locales.

• Ruby files under autoload_paths.

• db/schema.rb and db/structure.sql.

If anything in there changes, there is a middleware that detects it and reloads the code.

Autoloading keeps track of autoloaded constants. Reloading is implemented by removing them all from their respective classes and modules using Module#remove_const. That way, when the code goes on, those constants are going to be unknown again, and files reloaded on demand.

9 Module#autoload isn't Involved

Module#autoload provides a lazy way to load constants that is fully integrated with the Ruby constant lookup algorithms, dynamic constant API, etc. It is quite transparent.

Rails internals make extensive use of it to defer as much work as possible from the boot process. But constant autoloading in Rails is not implemented with Module#autoload.

One possible implementation based on Module#autoload would be to walk the application tree and issue autoload calls that map existing file names to their conventional constant name.

There are a number of reasons that prevent Rails from using that implementation.

For example, Module#autoload is only capable of loading files using require, so reloading would not be possible. Not only that, it uses an internal require which is not Kernel#require.

Then, it provides no way to remove declarations in case a file is deleted. If a constant gets removed with Module#remove_const its autoload is not triggered again. Also, it doesn't support qualified names, so files with namespaces should be interpreted during the walk tree to install their own autoload calls, but those files could have constant references not yet configured.

An implementation based on Module#autoload would be awesome but, as you see, at least as of today it is not possible. Constant autoloading in Rails is implemented with Module#const_missing, and that's why it has its own contract, documented in this guide.

10 Common Gotchas

10.1 Nesting and Qualified Constants

Let's consider

module Admin
  class UsersController < ApplicationController
    def index
      @users = User.all
    end
  end
end

and

class Admin::UsersController < ApplicationController
  def index
    @users = User.all
  end
end

To resolve User Ruby checks Admin in the former case, but it does not in the latter because it does not belong to the nesting. (See Nesting and Resolution Algorithms.)

Unfortunately Rails autoloading does not know the nesting in the spot where the constant was missing and so it is not able to act as Ruby would. In particular, Admin::User will get autoloaded in either case.

Albeit qualified constants with class and module keywords may technically work with autoloading in some cases, it is preferable to use relative constants instead:

module Admin
  class UsersController < ApplicationController
    def index
      @users = User.all
    end
  end
end

10.2 Autoloading and STI

Single Table Inheritance (STI) is a feature of Active Record that easies storing a hierarchy of models in one single table. The API of such models is aware of the hierarchy and encapsulates some common needs. For example, given these classes:

# app/models/polygon.rb
class Polygon < ActiveRecord::Base
end

# app/models/triangle.rb
class Triangle < Polygon
end

# app/models/rectangle.rb
class Rectangle < Polygon
end

Triangle.create creates a row that represents a triangle, and Rectangle.create creates a row that represents a rectangle. If id is the ID of an existing record, Polygon.find(id) returns an object of the correct type.

Methods that operate on collections are also aware of the hierarchy. For example, Polygon.all returns all the records of the table, because all rectangles and triangles are polygons. Active Record takes care of returning instances of their corresponding class in the result set.

Types are autoloaded as needed. For example, if Polygon.first is a rectangle and Rectangle has not yet been loaded, Active Record autoloads it and the record is correctly instantiated.

All good, but if instead of performing queries based on the root class we need to work on some subclass, things get interesting.

While working with Polygon you do not need to be aware of all its descendants, because anything in the table is by definition a polygon, but when working with subclasses Active Record needs to be able to enumerate the types it is looking for. Let’s see an example.

Rectangle.all only loads rectangles by adding a type constraint to the query:

SELECT "polygons".* FROM "polygons"
WHERE "polygons"."type" IN ("Rectangle")

Let’s introduce now a subclass of Rectangle:

# app/models/square.rb
class Square < Rectangle
end

Rectangle.all should now return rectangles and squares:

SELECT "polygons".* FROM "polygons"
WHERE "polygons"."type" IN ("Rectangle", "Square")

But there’s a caveat here: How does Active Record know that the class Square exists at all?

Even if the file app/models/square.rb exists and defines the Square class, if no code yet used that class, Rectangle.all issues the query

SELECT "polygons".* FROM "polygons"
WHERE "polygons"."type" IN ("Rectangle")

That is not a bug, the query includes all known descendants of Rectangle.

A way to ensure this works correctly regardless of the order of execution is to load the leaves of the tree by hand at the bottom of the file that defines the root class:

# app/models/polygon.rb
class Polygon < ActiveRecord::Base
end
require_dependency ‘square’

Only the leaves that are at least grandchildren have to be loaded that way. Direct subclasses do not need to be preloaded and, if the hierarchy is deeper, intermediate classes will be autoloaded recursively from the bottom because their constant will appear in the class definitions as superclass.

10.3 Autoloading and require

Files defining constants to be autoloaded should never be required:

require 'user' # DO NOT DO THIS

class UsersController < ApplicationController
  ...
end

There are two possible gotchas here in development mode:

1. If User is autoloaded before reaching the require, app/models/user.rb runs again because load does not update $LOADED_FEATURES.

2. If the require runs first Rails does not mark User as an autoloaded constant and changes to app/models/user.rb aren't reloaded.

Just follow the flow and use constant autoloading always, never mix autoloading and require. As a last resort, if some file absolutely needs to load a certain file use require_dependency to play nice with constant autoloading. This option is rarely needed in practice, though.

Of course, using require in autoloaded files to load ordinary 3rd party libraries is fine, and Rails is able to distinguish their constants, they are not marked as autoloaded.

10.4 Autoloading and Initializers

Consider this assignment in config/initializers/set_auth_service.rb:

AUTH_SERVICE = if Rails.env.production?
  RealAuthService
else
  MockedAuthService
end

The purpose of this setup would be that the application uses the class that corresponds to the environment via AUTH_SERVICE. In development mode MockedAuthService gets autoloaded when the initializer runs. Let’s suppose we do some requests, change its implementation, and hit the application again. To our surprise the changes are not reflected. Why?

As we saw earlier, Rails removes autoloaded constants, but AUTH_SERVICE stores the original class object. Stale, non-reachable using the original constant, but perfectly functional.

The following code summarizes the situation:

class C
  def quack
    'quack!'
  end
end

X = C
Object.instance_eval { remove_const(:C) }
X.new.quack # => quack!
X.name      # => C
C           # => uninitialized constant C (NameError)

Because of that, it is not a good idea to autoload constants on application initialization.

In the case above we could implement a dynamic access point:

# app/models/auth_service.rb
class AuthService
  if Rails.env.production?
    def self.instance
      RealAuthService
    end
  else
    def self.instance
      MockedAuthService
    end
  end
end

and have the application use AuthService.instance instead. AuthService would be loaded on demand and be autoload-friendly.

10.5 require_dependency and Initializers

As we saw before, require_dependency loads files in an autoloading-friendly way. Normally, though, such a call does not make sense in an initializer.

One could think about doing some require_dependency calls in an initializer to make sure certain constants are loaded upfront, for example as an attempt to address the gotcha with STIs.

Problem is, in development mode autoloaded constants are wiped if there is any relevant change in the file system. If that happens then we are in the very same situation the initializer wanted to avoid!

Calls to require_dependency have to be strategically written in autoloaded spots.

10.6 When Constants aren't Missed

Let's consider an Image model, superclass of Hotel::Image:

# app/models/image.rb
class Image
end

# app/models/hotel/image.rb
module Hotel
  class Image < Image
  end
end

No matter which file is interpreted first, app/models/hotel/image.rb is well-defined.

Now consider a third file with this apparently harmless code:

# app/models/hotel/poster.rb
module Hotel
  class Poster < Image
  end
end

The intention is to subclass Hotel::Image, but which is actually the superclass of Hotel::Poster? Well, it depends on the order of execution:

1. If neither app/models/image.rb nor app/models/hotel/image.rb have been loaded at that point, the superclass is Hotel::Image because Rails is told Hotel is missing a constant called "Image" and loads app/models/hotel/image.rb. Good.

2. If app/models/hotel/image.rb has been loaded at that point, the superclass is Hotel::Image because Ruby is able to resolve the constant. Good.

3. Lastly, if only app/models/image.rb has been loaded so far, the superclass is Image. Gotcha!

The last scenario (3) may be surprising. Why isn't Hotel::Image autoloaded? Because Ruby is able to resolve Image as a top-level constant, so autoloading does not even get a chance.

Most of the time, these kind of ambiguities can be resolved using qualified constants. In this case we would write

module Hotel
  class Poster < Hotel::Image
  end
end

That class definition now is robust.

It is interesting to note here that the fix works because Hotel is a module, and Hotel::Image won’t look for Image in Object as it would if Hotel was a class with Object in its ancestors. If Hotel was a class we would resort to loading Hotel::Image with require_dependency. Furthermore, with that solution the qualified name would no longer be necessary.

10.7 Autoloading within Singleton Classes

Let's suppose we have these class definitions:

# app/models/hotel/services.rb
module Hotel
  class Services
  end
end

# app/models/hotel/geo_location.rb
module Hotel
  class GeoLocation
    class << self
      Services
    end
  end
end

If Hotel::Services is known by the time app/models/hotel/geo_location.rb is being loaded, Services is resolved by Ruby because Hotel belongs to the nesting when the singleton class of Hotel::GeoLocation is opened.

But if Hotel::Services is not known, Rails is not able to autoload it, the application raises NameError.

The reason is that autoloading is triggered for the singleton class, which is anonymous, and as we saw before, Rails only checks the top-level namespace in that edge case.

An easy solution to this caveat is to qualify the constant:

module Hotel
  class GeoLocation
    class << self
      Hotel::Services
    end
  end
end

10.8 Autoloading in BasicObject

Direct descendants of BasicObject do not have Object among their ancestors and cannot resolve top-level constants:

class C < BasicObject
  String # NameError: uninitialized constant C::String
end

When autoloading is involved that plot has a twist. Let's consider:

class C < BasicObject
  def user
    User # WRONG
  end
end

Since Rails checks the top-level namespace User gets autoloaded just fine the first time the user method is invoked. You only get the exception if the User constant is known at that point, in particular in a second call to user:

c = C.new
c.user # surprisingly fine, User
c.user # NameError: uninitialized constant C::User

because it detects a parent namespace already has the constant (see Qualified References.)

As with pure Ruby, within the body of a direct descendant of BasicObject use always absolute constant paths:

class C < BasicObject
  ::String # RIGHT

  def user
    ::User # RIGHT
  end
end

反饋

歡迎幫忙改善指南的品質。

如發現任何錯誤之處，歡迎修正。開始貢獻前，可以先閱讀貢獻指南：文件。

翻譯如有錯誤，深感抱歉，歡迎 Fork 修正，或至此處回報。

文章可能有未完成或過時的內容。請先檢查 Edge Guides 來確定問題在 master 是否已經修掉了。再上 master 補上缺少的文件。內容參考 Ruby on Rails 指南準則來了解行文風格。

最後，任何關於 Ruby on Rails 文件的討論，歡迎至 rubyonrails-docs 郵件論壇。